View FLC43XWC8V-06A_6929474.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

to : specification of fujitsu tft-lcd module FLC43XWC8V-06A approval this product is designed, developed and manufactured as contemplated for general use, including without limitation, general office use, person al use, household use, and ordinary industrial use, but is not designed, developed and manufactured as contemplated for use accompanying fatal risks or dangers that, unless extremely high safety is secured, could lead directly to death, personal injury, severe physical damage or other loss (hereinafter ?high safety requir ed use?), including without limita tion, nuclear reaction control in nuclear facility, aircraft flight control, air traffic cont rol, mass transport control, medical life support system, missile launch control in weapon system. if customer?s product possibly falls under the category of high safety required use, please consult with our sales representatives in charge before such use. in addition, fdtc shall not be liable against the customer and/or any third party for any claims or damages arising in connection with the high safety required use of the produc t without permission . specification no. : tech bes lcd-00281 issue date : july. 9, 2004 issued by : f. yamada director design dept. lcd products div. fujitsu display technologies corporation date by
? 2 FLC43XWC8V-06A 3 1 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC43XWC8V-06A tech bes lcd-00281 1 2 3 4 a b c c fujitsu display technologies corporation revision history revision date prepared checked approved summary 01a june.23,2004 s.sekido h.takahashi t.ito f.yamada 1st issue 39 02 20040709 takahashi p8 revised ito 20040623 sekido takahashi ito
? 2 FLC43XWC8V-06A 3 2 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC43XWC8V-06A tech bes lcd-00281 1 2 3 4 a b c c fujitsu display technologies corporation table of contents 1. applicati ons .......................................................................................................... 3 2. product name and model name 2-1.produc t name ......................................................................................................... 3 2-2.model name ............................................................................................................ 3 3. overvi ew ................................................................................................................. 3 4. configurat ion...................................................................................................... 3 5. mechanical speci fication s ........................................................................... 4 6. absolute maximu m ratings ........................................................................... 5 7. recommended operating condit ions....................................................... 5 8. electrical speci fication s ............................................................................. 6 9. optical specifi cations..................................................................................... 8 10.interface specifications 10-1.signal de scriptio ns ............................................................................................... 12 10-2.color data assignme nt ........................................................................................ 15 10-3.input sign al timing ............................................................................................. 16 10-4.correspondence between da ta and display position ......................................... 18 10-5.power suppl y sequence ....................................................................................... 18 11.backlight specifications 11-1.pin configurat ion for ba cklight ........................................................................... 19 11-2.ccfl ..................................................................................................................... 1 9 11-3.life...................................................................................................................... ... 19 11-4.lamp assembly se t (for replac ement) ................................................................ 19 12.appearance specifications 12-1.zo ne...................................................................................................................... . 20 12-2.bright spot ............................................................................................................ 20 12-3.test co nditio n....................................................................................................... 20 12-4.stan dard ............................................................................................................... 20 13.environmental sp ecificati ons ................................................................. 23 14.indicati ons .......................................................................................................... 24 15.packag ing ............................................................................................................. 25 16.warrant y .............................................................................................................. 33 17.precauti ons ........................................................................................................ 33 18.precautions for us e ....................................................................................... 37 19.miscella neous................................................................................................... 37
? 2 FLC43XWC8V-06A 3 3 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC43XWC8V-06A tech bes lcd-00281 1 2 3 4 a b c c fujitsu display technologies corporation 1. applications this specification is applied to the 17. 0 in. xga-wide supported tft-lcd module. 2. product name and model name 2-1. product name : lcd module 2-2. model name : FLC43XWC8V-06A 3. overview this lcd module has a tft active matrix type liquid crystal panel 1280768 pixels, and diagonal size of 43cm (17.0-inch). this module supports 1280768 xga- wide mode (non-interlace). this lcd has a xga-wide-capable 1ch-lvds in terface and can display 16.2 million colors. by timing control signal, images are displayed on the screen at given value under specified timing. control signals to this lcd module are enab (data enable signal), dclk signal and rgb data signal. data signal is transmitted with single port. (8 bit for each r, g, b) internal control signal of timing cont rol ic to data-ic are 1ch-rsds signal. the power supply of this lcd module is +5v dc . this module has the characteristics that apply to tco?03 and ebu100%. 4. configuration this lcd module consists of a color tft-lcd panel that mounted with tft driver ics, a cold-cathode fluorescen t tube back-light, a lvds interface pcb, a structure and a bezel. and these components are integrated in a lcd module. cold-cathode fluorescent tube and lamp holder are replaceable. fig.4-1 shows a block diagram of this lcd module.
? 2 FLC43XWC8V-06A 3 4 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC43XWC8V-06A tech bes lcd-00281 1 2 3 4 a b c c fujitsu display technologies corporation rsds lvds figure 4-1. block diagram 5. mechanical specifications table 5-1 shows the mechanical specifications of this lcd module. table 5-1. mechanical specifications item specifications unit remark dimensions 413.8259.015.0(typ.) mm display resolution (12803) 768 ? display dot area 369.6221.76 mm dot pitch (0.096253) 0.28875 mm edge type backlight is used. ( 2.6 ccfl4) outward appearance is shown at last page. aspect ratio 1 ? : ? 1 ? weight 2,000 max g fg-sg separate ? back light (ccfl) (separate) interface circuit dc/dc converter data driver ?k?b?c panel 1280?~3(rgb)?~768 inverter gate driver input signal rxclk ? rxclk+ rx0 ? rx0+ rx1 ? rx1+ rx2 ? rx2+ rx3 ? rx3+ power supply ?{?t?u ?c?b dc bias power supply circuit
? 2 FLC43XWC8V-06A 3 5 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC43XWC8V-06A tech bes lcd-00281 1 2 3 4 a b c c fujitsu display technologies corporation 6. absolute maximum ratings table 6-1 shows the absolute maximum rating of this lcd module. table 6-1. absolute maximum ratings item symbol min. typ. max. unit supply voltage v cc 0.3 ? 6.0 v input voltage v in 0.3 ? vcc+0.3 v 7. recommended operating conditions table 7-1 shows the recommended operat ing conditions of this lcd module. table 7-1. recommended operating conditions item symbol min. typ. max. unit supply voltage v cc 4.75 5.0 5.25 v ripple voltage (vcc) v rp ? ? 100 mvp-p
? 2 FLC43XWC8V-06A 3 6 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC43XWC8V-06A tech bes lcd-00281 1 2 3 4 a b c c fujitsu display technologies corporation 8. electrical specifications table 8-1 shows the electrical spec ifications of this lcd module. table 8-1. electrical specifications item symbol condition min. typ. max. unit remark supply current i cc ? 700 1000 ma *1 ?h? level logic input voltage v ih v cc= +5.00.25v vss=0v dclk=32.498mhz 0.7 ?~ vcc ? v cc+ 0.3 v *2 ?l? level logic input voltage v il gnd ? 0.3 ?~ vcc v *2 ?? ?k =50khz, ta=25oc ? 1230 1600 ccfl turn on voltage v s ?? ?k =50khz, ta=0oc ? ? 1600 vrms lighting voltage v l ?? ?k =50khz ?h ?k =10.5ma 590 630 670 vrms *4 back light lighting frequency ?? l ?u ?k =630vrms 40 50 60 khz *3 tube current ?h l ?? ?k =50khz v ?k =630vrms 9.5 10.5 11.0 ?? arms *4 (*1) typical current value is me asured when gray scale (vertical 256 levels) is displayed at vcc=5.0v. maximum current value is measured when v stripes with respect to each rgb dot are displayed at vcc=5.0v. without rush current. (*2) timing control circuit input voltage (*3) backlight specifications are valid when usin g a suitable inverter such as the ?flcv-15? of fdtc. (*4) tube current (i l ) shows the value of the current and voltage that is consumed at one lamp. (4 tubes/unit) this lcd module has 4 lamps. each 2 lamps are placed at upper and lower side of the display. 2 lamps are connected in parallel. each low vo ltage terminals (gnd side) are bound into 1 line cable. (see 11-1. pin configuration for backlight)
? 2 FLC43XWC8V-06A 3 7 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC43XWC8V-06A tech bes lcd-00281 1 2 3 4 a b c c fujitsu display technologies corporation note 1) measurement circuit based on fig.8-1. fig.8-1. measurement circuit note 2) equivalent circuit based on fig.8-2 (a), (b). fig.8-2 (a) equivalent circuit of logic signal input fuse: kab2402 252 na29010(matsuo electric co., ltd.)or equivalent. emi filter: sgm20c1e332-2a(sumitomo metal)or equivalent. fig.8-2 (b) equivalent circuit of power supply fuse (2.5a) gnd vcc fg ?i frame ground ?j emi filter internal circuit 22uf 10 ? +5v gnd ? ac gnd icc ? l ? !? module vcc ? v l ? c l ? v s ? dc/dc converter back- light input signals(lvds-1ch) ?
? ?
?? ?? ??? ??? ???? ?? ??? ?? ??? + ?\ internal circuit differential input 100 ?? lvds receiver
? 2 FLC43XWC8V-06A 3 8 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC43XWC8V-06A tech bes lcd-00281 1 2 3 4 a b c c fujitsu display technologies corporation 9. optical specifications table 9-1 shows the optical specif ications of this lcd module. table 9-1. optical specifications ????????????????? signal timing=typ, ta=25o c specifications remark item symbol condition min. typ. max unit note horizontal l,r u,d =0o 85 ? ? deg visual angle vertical u,d cr 10 l,r =0o 85 ? ? deg (1)(2) (3)(5) (6) contrast ratio cr l,r,u,d =0o 350 600 ? ? white/ black (1)(2) (3)(5) ta=25oc ? 15 30 ms response time(on) (b w) rise l,r, u,d =0o ta=0oc ? 50 100 ms ta=25oc ? 10 25 ms response time(off) (w b) fall l,r, u,d =0o ta=0oc ? 50 100 ms (1) (4) (5) response time (rise or fall) (all gray scale) av g l,r, u,d =0o ta=25 ? ? 1 2 ? ms average of response time, *2 brightness i 350 450 ? cd/m 2 (1)(5) brightness uniformity ? i 75 ? ? % (1)(5) (7) x 0.283 0.313 0.343 ? chromaticity w y l,r,u,d =0o v cc =5v, i l =10.5ma (at maximum brightness) 0.299 0.329 0.359 ? white *1 r red (0.64, 0.35 typ.) g green (0.29, 0.59 typ.) b (x, y) r,g,b signal=all "h" blue (0.14, 0.08 typ.) (1) (5) -curve 2.4 typ. lcd panel type tft color display mode normally black va wide viewing angle technology mva-premium optimum viewing angle ? (symmetry) (6) display color 16.2 million (each 6-bit+2-bit frc) color of non-display area black surface treatment anti-glare (haze value:25%, 3h(at weight of 300g)) (*1) specified value is measured in 20~30 minutes after lighting on (lcd module single). a required value may not be achieved on condition that lcd module is built in the cabinet because of its radiation. all items without ?brightness uniformity? are measured at the center of display board. (*2) in case of applying optimized over driving method. (note1) *cs-1000 (minolta co., ltd.) , field=2o, l=500mm *be careful that the luminance meter, which you use, may not be able to get correct brightness if it?s no set correctly. 02 20040709 response time changed ?a 10
? 2 FLC43XWC8V-06A 3 9 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC43XWC8V-06A tech bes lcd-00281 1 2 3 4 a b c c fujitsu display technologies corporation note 1) definition of viewing angle (1) based on fig.9-2. * u =0o, d =0o, l =0o, r =0o fig.9-2. definition of viewing angle (1) note 2) definition of viewing angle (2) based on fig.9-3. fig.9-3. definition of viewing angle (2) note 3) definition of contrast ratio (cr) determined by formula (1) based on fig.9-4.voltage-brightness characteristics. l w (brightness at white) = -------- (1) l b (brightness at black) 0 fig.9-4. voltage-brightness characteristics *0o ( front ) u ??? y + top (12 o?clock direction) lcd module x ? left (9 o?clock direction) y ? bottom (6 o?clock direction) x + right (3 o?clock direction) d l r display surface display surface max typ min l,r,u,d =0o panel drive voltage [v] brightness | l white l 0 black l ,
? 2 FLC43XWC8V-06A 3 10 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC43XWC8V-06A tech bes lcd-00281 1 2 3 4 a b c c fujitsu display technologies corporation note 4) definition of response time based on figure 9-4. figure 9-5 definition of response time note 5) contrast ratio and response measurement system based on fig.9-6. fig.9-6. contrast ratio and response time measurement system drive and measurement system y + y ? x + z + z ? x ? brightness meter or luminance colorimeter (with luminosity correction function) relative brightnes rise fall 90% 1 0% rise res p onse time fall res p onse time 100% 10% 90% 0%
? 2 FLC43XWC8V-06A 3 11 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC43XWC8V-06A tech bes lcd-00281 1 2 3 4 a b c c fujitsu display technologies corporation note 6) definition of optimum viewing angle based on fig.9-7. fig.9-7. definition of viewing angle note 7) definition of brightness uniformity brightness uniformity is define d by the following formula. brightness (i1~i9) art measured at the followin g 9 points ( 1 ~ 9 ) on the display area shown in fig.9-8. |min. in| brightness uniformity ( ? l) = 100 (%), n=1 to 9 |max. in| 192 640 1088 1 4 7 115 2 5 8 384 3 6 9 653 note) each measurement point ( 1 ~ 9 ) defines the center spot of brightness meter view. the tolerance of measurement position is 3mm. fig.9-8. measurement points 10 (-) (+) 0 6 o?clock viewing angle 12 o?clock max contrast ratio
?y FLC43XWC8V-06A ?z 12 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC43XWC8V-06A tech bes lcd-00281 1 2 3 4 a b c c fujitsu display technologies corporation 10. interface specifications 10-1-1. signal descriptions table 10-1 shows the description and conf iguration of interface signals (cn1). table 10-1-1. interface signals (cn1) pin ?? symbol i/o function 1 vdd ?| +5v power supl y 2 vdd ?| +5v power su p l y 3 gnd ?| ground 4 gnd ?| ground 5 rx0- ?h lvds receiver si g nal(-) 6 rx0+ ?h lvds receiver si g nal(+) 7 gnd ?| ground 8 rx1- ?h lvds receiver si g nal(-) 9 rx1+ ?h lvds receiver si g nal(+) 10 gnd ?| ground 11 rx2- ?h lvds receiver si g nal(-) 12 rx2+ ?h lvds receiver si g nal(+) 13 gnd ?| ground 14 rxcl k - ?h lvds receiver clock si g nal(-) 15 rxclk+ ?h lvds receiver clock si g nal(+) 16 gnd ?| ground 17 rx3- ?h lvds receiver si g nal(-) 18 rx3+ ?h lvds receiver si g nal(+) 19 gnd ?| ground 20 data mapping select input i low : table 10-1-2 open or hi : table 10-1-3 note)when using a interface connector other than the recommended one, a defect in the initial stage or a problem concerning long term reliabiliting may occur. connector ?f d14h-20p-1.25h(hirose) user?s connector ?f df14-20s-1.25 (hirose) upper side interface connector lcd module rear side 20 lower side 1
?y FLC43XWC8V-06A ?z 13 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC43XWC8V-06A tech bes lcd-00281 1 2 3 4 a b c c fujitsu display technologies corporation 10-1-2. lvds data mapping 1 table 10-1-2 shows the lvds data mapping 1.(datamappingselectinput = low) table 10-1-2. lvds data mapping 1 pin input system side pin lcd module pin output 51 txin0 ?q?o 27 rxout0 ?h?q?o 52 txin1 ?q?p 29 rxout1 ?h?q?p 54 txin2 ?q?q 30 rxout2 ?h?q?q 55 txin3 ?q?r 32 rxout3 ?h?q?r 56 txin4 ?q?s 33 rxout4 ?h?q?s 2txin5 ?q?v txout3- txout3+ 17 18 rx3- rx3 + 34 rxout5 ?h?q?v 3txin6 ?q?t 35rxout6 ?h?q?t 4txin7 ?f?o 37rxout7 ?h?f?o 6txin8 ?f?p 38rxout8 ?h?f?p 7txin9 ?f?q 39rxout9 ?h?f?q 8 txin10 ?f?u 41 rxout10 ?h?f?u 10 txin11 ?f?v 42 rxout11 ?h?f?v 11 txin12 ?f?r 43 rxout12 ?h?f?r 12 txin13 ?f?s 45 rxout13 ?h?f?s 14 txin14 ?f?t 46 rxout14 ?h?f?t 15 txin15 ?a?o 47 rxout15 ?h?a?o 16 txin16 ?a?u 49 rxout16 ?h?a?u 18 txin17 ?a?v 50 rxout17 ?h?a?v 19 txin18 ?a?p txout1- txout1+ 8 9 rx1- rx1+ 51 rxout18 ?h?a?p 20 txin19 ?a?q 53 rxout19 ?h?a?q 22 txin20 ?a?r 54 rxout20 ?h?a?r 23 txin21 ?a?s 55 rxout21 ?h?a?s 24 txin22 ?a?t 1 rxout22 ?h?a?t 25 txin23 reserved txout3- txout3+ 17 18 rx3- rx3+ 2 rxout23 not use 27 txin24 reserved 3 rxout24 not use 28 txin25 reserved 5 rxout25 not use 30 txin26 enab 6 rxout26 ?d?m?`?a 50 txin27 ?q?u txout3- txout3+ 17 18 rx3- rx3 + 7rxout27 ?h?q?u txout0- txout0+ txout0- txout0+ 31 txclkin txout2- txout2+ txout2- txout2+ txclkout- txclkout+ symbol dclk transmitter ( ds90cf385) lcd control input interface connector receiver ( ds90cf386) txout1- txout1+ txout3- txout3+ txout1- txout1+ txout3- txout3+ 17 18 11 12 11 12 5 6 5 6 8 9 17 18 14 15 rx0- rx0+ rx0- rx0+ rx1- rx1+ rx3- rx3+ rx1- rx1+ rx3- rx3+ rx2- rx2+ rx2- rx2+ 8 9 rxclkout ?c?b?k?j rxclk- rxclk+ 26
?y FLC43XWC8V-06A ?z 14 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC43XWC8V-06A tech bes lcd-00281 1 2 3 4 a b c c fujitsu display technologies corporation 10-1-3. lvds data mapping 2 table 10-1-3 shows the lvds data mapping 2.(datamappingselectinput = open or hi) table 10-1-3. lvds data mapping 2 pin input system side pin lcd module pin output 51 txin0 ?q?q 27 rxout0 ?h?q?q 52 txin1 ?q?r 29 rxout1 ?h?q?r 54 txin2 ?q?s 30 rxout2 ?h?q?s 55 txin3 ?q?t 32 rxout3 ?h?q?t 56 txin4 ?q?u 33 rxout4 ?h?q?u 2txin5 ?q?p txout3- txout3+ 17 18 rx3- rx3+ 34 rxout5 ?h?q?p 3txin6 ?q?v 35rxout6 ?h?q?v 4txin7 ?f?q 37rxout7 ?h?f?q 6txin8 ?f?r 38rxout8 ?h?f?r 7txin9 ?f?s 39rxout9 ?h?f?s 8 txin10 ?f?o 41 rxout10 ?h?f?o 10 txin11 ?f?p 42 rxout11 ?h?f?p 11 txin12 ?f?t 43 rxout12 ?h?f?t 12 txin13 ?f?u 45 rxout13 ?h?f?u 14 txin14 ?f?v 46 rxout14 ?h?f?v 15 txin15 ?a?q 47 rxout15 ?h?a?q 16 txin16 ?a?o 49 rxout16 ?h?a?o 18 txin17 ?a?p 50 rxout17 ?h?a?p 19 txin18 ?a?r txout1- txout1+ 8 9 rx1- rx1+ 51 rxout18 ?h?a?r 20 txin19 ?a?s 53 rxout19 ?h?a?s 22 txin20 ?a?t 54 rxout20 ?h?a?t 23 txin21 ?a?u 55 rxout21 ?h?a?u 24 txin22 ?a?v 1 rxout22 ?h?a?v 25 txin23 reserved txout3- txout3+ 17 18 rx3- rx3+ 2 rxout23 not use 27 txin24 reserved 3 rxout24 not use 28 txin25 reserved 5 rxout25 not use 30 txin26 enab 6 rxout26 ?d?m?`?a 50 txin27 ?q?o txout3- txout3+ 17 18 rx3- rx3+ 7rxout27 ?h?q?o txout0- txout0+ txout0- txout0+ 31 txclkin txout2- txout2+ txout2- txout2+ txclkout- txclkout+ symbol dclk transmitter ( ds90cf385) lcd control input interface connector receiver ( ds90cf386) txout1- txout1+ txout3- txout3+ txout1- txout1+ txout3- txout3+ 17 18 11 12 11 12 5 6 5 6 8 9 17 18 14 15 rx0- rx0+ rx0- rx0+ rx1- rx1+ rx3- rx3+ rx1- rx1+ rx3- rx3+ rx2- rx2+ rx2- rx2+ 8 9 rxclkout ?c?b?k?j rxclk- rxclk+ 26
?y FLC43XWC8V-06A ?z 15 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC43XWC8V-06A tech bes lcd-00281 1 2 3 4 a b c c fujitsu display technologies corporation 10-2. color data assignment table 10-2 shows the color data assignment. table 10-2. color data assignment color and input data ?i?o?f low level ?c?p?f high level ?j brightness r7 r6 r5 r4 r3 r2 r1 r0 g7 g6 g5 g4 g3 g2 g1 g0 b7 b6 b5 b4 b3 b2 b1 b0 basic color black blue green cyan red magenta yellow white 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 red black darker ? brighter ? red 0 1 2 ?f ?f 253 254 255 0 0 0 : : : 1 1 1 0 0 0 : : : 1 1 1 0 0 0 : : : 1 1 1 0 0 0 : : : 1 1 1 0 0 0 : : : 1 1 1 0 0 0 : : : 1 1 1 0 0 1 : : : 0 1 1 0 1 0 : : : 1 0 1 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 green black darker ? brighter ? green 0 1 2 ?f ?f 253 254 255 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 1 1 1 0 0 0 : : : 1 1 1 0 0 0 : : : 1 1 1 0 0 0 : : : 1 1 1 0 0 0 : : : 1 1 1 0 0 0 : : : 1 1 1 0 0 1 : : : 0 1 1 0 1 0 : : : 1 0 1 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 blue black darker ? brighter ? blue 0 1 2 ?f ?f 253 254 255 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 1 1 1 0 0 0 : : : 1 1 1 0 0 0 : : : 1 1 1 0 0 0 : : : 1 1 1 0 0 0 : : : 1 1 1 0 0 0 : : : 1 1 1 0 0 1 : : : 0 1 1 0 1 0 : : : 1 0 1 note.1) definition of gray scale : colo r (n) ---?n? indicates gray scale level. the gray scale is brighter as the number is larger. note.2) data; 1: high, 0: low note.3) by inputting 8-bit data signal for each red, green and blue, this module can display 256 gray scale independently for each color. therefore, the module is able to display 16 million colors. color data are 24 lines.
?y FLC43XWC8V-06A ?z 16 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC43XWC8V-06A tech bes lcd-00281 1 2 3 4 a b c c fujitsu display technologies corporation 10-3. input signal timing table 10-3 and fig.10-3 shows the input signal timing. table 10-3. timing characteristics (t=0~50o c , vcc=50.25v) item symbol min. typ. max. unit remark dclk signal period tc 12.195 15.382 20.000 ns (clock) frequency fc 50.00 65.01 82.00 mhz fc=1/tc duty tch/tc 45 50 55 ?? *1 high time tclkh 5.0 ? ? ns low time tclkl 5.0 ? ? ns rise time tclkr ? ? 5.0 ns fall time tclkf ? ? 5.0 ns dclk-data setup time tset 4 ? ? ns timing hold time thold 4 ? ? ns horizontal period th 1310 1344 1688 dclk frequency fh 35.0 48.3 75.0 khz display period thd 1280 1280 1280 dclk *2,3 vertical period tv 776 806 806 th 16.67ms frequency 1/tv 50 60 75 hz wxga mode display period tvd 768 768 768 th *2,3 data-enab timing data-enab timing tdn 0 0 0 dclk *4 *1) dclk signal input must be va lid while power supply is applied. *2) display position is specified by the enab signal only. ?e horizontal display position is specified by the rise of enab signal. the data which is latched by the falling edge of 1st dclk right after the rise of enab, is displayed on the left edge of the screen. ?e vertical display position is specified by the rise of enab after a ?low? level period equivalent to eight times of horizontal period . the 1st data corresponding to one horizontal line after the rise of enab is displayed at the top line of screen. *3) if a period of enab ?high? is less than 1280 dclk or less than 768 lines, the rest of the screen displays black. *4) the display position does not fit to the screen if a period of enab ?high? and the effective data period do not synchronize with each other. *5) the specifications of all are not provided individually. it is necessary that all of those specifications are satisfied at the same time. *6) the display quality is guaranteed by the typ timing.
?y FLC43XWC8V-06A ?z 17 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC43XWC8V-06A tech bes lcd-00281 1 2 3 4 a b c c fujitsu display technologies corporation dclk r0-7 g0-7 b0-7 r0-7 g0-7 b0-7 enab r0-7 g0-7 b0-7 enab dclk r0-7 g0-7 b0-7 enab fig.10-3.input signal timing chart tch tc tc1 tset thold 1.65v 2.3v 0.9v tclkh tclkl tclkr tclkf 2.3v 0.9v th thd 1278 0001 0002 0003 0004 0005 0006 1274 1275 1276 1277 1279 1280 tdn=0clk tdn=0clk tc c001 c768 tvd tv
?y FLC43XWC8V-06A ?z 18 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC43XWC8V-06A tech bes lcd-00281 1 2 3 4 a b c c fujitsu display technologies corporation 10-4. correspondence between data and display position fig.10-4 shows the correspondence between data and display position . r 0001 g 0001 b 0001 r 0002 g 0002 b 0002 r 0003 g 0003 g 1280 b 1280 r 0001 g 0001 b 0001 r 0002 g 0002 b 0002 r 0003 g 0003 g 1280 b 1280 fig.10-4.correspondence data and display position 10-5. power supply sequence the sequence of input signals and on/off of th e power supply of this lcd module should be in the specification shown in fig.10-5 to preven t latch-up of the driver ics and dc driving of the lcd panel. fig.10-5. power supply sequence s0001 s0002 s0003 s0004 s0005 s0006 s0007 s0008 s3839 s3840 c001 c768 ?` t4 ?? 20ms ( volta g e descent ) 0ms ?? t5 ?? 40ms t2 4.75v 4.75v (4.5v) t1 ?? 20ms 4.75v 90% 10% 4.75v 0.5v 0.1s ?? t7 ?` ?` ?` on off (0v) h l dclk should be in a range of the spec.(frequency etc. ?j of the lcd. 0ms ?? t2 ?? 40ms inputs should be in a rang e of the spec. of the lvds. tri-state tri-state t6 ?? 20ms vcc lvds differential input
?y FLC43XWC8V-06A ?z 19 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC43XWC8V-06A tech bes lcd-00281 1 2 3 4 a b c c fujitsu display technologies corporation 11. backlight specifications 11-1. pin configuration for backlight table 11-1(a) and 11-1(b) shows the description and pin assignment of the connectors (cn-a and b) for the backlight of this lcd module. table 11-1(a) pin assignment of cn-a table11-1(b) pin assignment of cn-b pin ?? signal function cable color pin ?? signal function cable color 1 v l 1 power supply for ccfl 1 red 1 v l 3 power supply for ccfl 3 red 2 v l 2 power supply for ccfl 2 red 2 v l 4 power supply for ccfl 4 red 3 nc ?\?\ ?| 3 nc ?\?\ ?| 4 gnd ground (for v l 1, 2) white 4 gnd ground (for v l 3, 4) white connector : housing : bhr-04vs-1 : contact : sbh-001t-p0.5 user?s connector : post with base : sm04(4.0)b-bhs-1-tb supplier : japan solderless terminal trading company ltd. (j.s.t.) 11-2. ccfl supplier : sanken electric co., ltd part no. sd26e3850e8350b3113000 11-3. life the life of the backlight is a minimum of 25,000 hours at the following conditions. (1) working conditions ?@ ambient temperature : 25 ?} 5o c ?a tube current(i l ) : (10.5ma or less) (2) definition of life ?@ brightness becomes 50% or below 50% of th e minimum brightness value shown in table 9-1. ?a the lamp cannot be lit by the breakdown voltage of 1600vvms. ?b lamp is flashing. 11-4. lamp assembly set (for replacement) lamp assembly set (with charge) is prepared for maintenance. this set consists of an upper lamp assembly and a lower lamp assembly. type number : flcl-39
?y FLC43XWC8V-06A ?z 20 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC43XWC8V-06A tech bes lcd-00281 1 2 3 4 a b c c fujitsu display technologies corporation 12. appearance specifications 12-1. zone ?e inside display dot area (369.6 221.8mm) ?e display dot area means active area. ?e one pixel consists of 3 dots (red, green and blue). ?e foreign particle and scratch unharmful to disp lay image, such as the foreign particle under polarizer film but outside of the displa y area and scratch on metal bezel, backlight module or polarizer film out of the display area, etc., are not counted. 12-2. bright spots (1) bright spots by the defect of tft. ?visible under bias of 2% nd filter ................................high br ight spot r?g ?visible under 5% but invisible under 2% nd filter......low bright spot r?g?b ?invisible under bias of 5% nd filter .............................not counted (2) bright spots by the light passing through tears, breaks, etc in color filter. ?exceed size of a half dot.................................................high br ight spot ?a half dot or less.............................................................not counted (3) bright spots by the light passing thro ugh tears, breaks, etc in chromium mask. ?exceed 50 m ..................................................................high br ight spot ?50 m or less ..................................................................not counted 12-3. test condition ?e inspector must observe the lc d screen from the normal di rection under the illumination by a single 20w fluorescent lamp. the distan ce between the lcd screen and the inspector should be a height of 50cm above the worktable. the vertical illuminance is 300 to 600lux (reference value). ?e bright spot should be counted under entire black screen. ?e dark spot should be counted under entire white screen. ?e frame frequency should be 60hz. 12-4. specifications table 12-4 shows the appearance standard. (note1) please do not mistake a single bright spot for a bright spot connection due to cs(supplemental capacitance) line at the center of each dot. (note2) if a pixel is dark partially, it connects into the number of dark spots in accordance with following rule. (a) s<1/3 : not count. only one of 4 dark connection is allowed. (b) 1/3< s<2/3 : considered as 0.5 dot. (c) 2/3< s : considered as 1 dot. (s=dark spot size/dot size) (note3) min. distance between foreign particles : 100mm
?y FLC43XWC8V-06A ?z 21 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC43XWC8V-06A tech bes lcd-00281 1 2 3 4 a b c c fujitsu display technologies corporation no. item judgment method and standard 1 bright spot (high and low) < 3 dots (note 1) 2 bright spot connection (high and low) < 1 pair (note 1) (2 dot connection in horizontal) 3 total of bright spot < 3 dots 4 dark spot < 5 dots (note 2) 5 dark spot connection < 2 pairs (2 dot connection in horizontal) (note 2) 6 total of dark spot < 5dots (note 2) 7 total of dot defect(bright and dark) < 8 dots 8 high-high high > 15mm distance of bright spot others > 5mm 9 distance of dark spot > 5mm w ?? 0.03 ?\?\?\?\ not count l ?? 6 not count 6 ?? l ?? 12 ?? 5 0.03 ?? w ?? 0.05 12 ?? l 0 l ?? 0.6 not count 0.6 ?? l ?? 5 ?? 3 5 ?? l,w ?~ l ?? 0.5 ?? 1 0.05 ?? w ?? 0.10 5 ?? l,0.5 ?? w ?~ l 0 10 scratch on polarizer 0.10 ?? w ?\?\?\?\ 0 d ?? 0.3 not count 0.3 ?? d ?? 0.4 ?? 6 11 dent on polarizer 0.4 ?? d 0 d ?? 0.5 not count 12 bubble in polarizer 0.5 ?? d 0 d ?? 0.5 ?? 5 13 spot (black/white) by foreign particle 0.5 ?? d 0 d ?? 0.2 not count 0.2 ?? d ?? 0.3 ?? 2 0.3 ?? d ?? 0.35 1 14 bright spot by fiber foreign particle (under the polarizer. i.e. between the polarizer and the glass) (note 3 ) 0.35 ?? d 0 w ?? 0.03 ?\?\?\?\ not count l ?? 6 not count 6 ?? l ?? 12 ?? 5 0.03 ?? w ?? 0.05 12 ?? l 0 l ?? 0.6 not count 0.6 ?? l ?? 5 ?? 3 0.05 ?? w ?? 0.1 5 ?? l 0 15 line (black /white), scratch by fiber foreign particle 0.1 ?? w (w+l)/2 ?? d count as spot (black/white) of no.13 16 mura invisible under 6%nd filter from center of display. (display pattern : black, white, 50%gray) d:average diameter [mm], w:width [mm], l:leng th [mm], s=(bright spot size)/(dot size)
?y FLC43XWC8V-06A ?z 22 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC43XWC8V-06A tech bes lcd-00281 1 2 3 4 a b c c fujitsu display technologies corporation applied area item condi tion specification as for the display position in the display dot area, the variation of tolerance between window frame of the upper bezel and dot display area (right , left, up and down) is shown in the following table. tolerance (x direction) tolerance (y direction) |e-f| ?? 1.0mm |a-b| ?? 1.0mm |e-h| ?? 0.7mm |a-d| ?? 0.7mm |f-g| ?? 0.7mm |b-c| ?? 0.7mm |g-h| ?? 1.0mm |c-d| ?? 1.0mm display dot area display location non- lighting *the dimension of effective display area, dot display area and display frame should follow the dimensions described in each specification. dot display width dot display width opening dimension of bezel effective dis p la y area dot display area width of display frame width of display frame bezel y x b a e f d c g h opening dimension of bezel
?y FLC43XWC8V-06A ?z 23 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC43XWC8V-06A tech bes lcd-00281 1 2 3 4 a b c c fujitsu display technologies corporation 13. environmental specifications table 13-1 shows the environmental specifications. table 13-1. environmental specifications item condition remark operation 0~57o c (note1) temperature storage -20~60o c temperature on surface of lcd panel (display area.) operation 20~85%rh humidity storage 5~85%rh maximum wet-bulb temperature should not exceed 29o c . no condensation. vibration non-operation 10~500hz, 1 cycle/20minute, 2g, 1.5mm max, 2hour each x, y and z directions shock non-operation 30g, 6ms, 1time each ?} x, ?} y and ?} z directions. for single module without package.(note2) note1: temperature on surface of lcd panel should be under 57 ?? . note2: table 13-2 and fig. 13-1 show the shock re sistance standard when module is packaged. table 13-2. shock resistance standard when module is packaged dropping location dropping height count a ~ j 60cm 1 time fig.13-1. direction to apply shock to package f ( side face ) g (top face) ?i (rear face) e ( side face ) c (edge) i (front face) b (edge) d (edge) h (bottom face) a (corner)
?y FLC43XWC8V-06A ?z 24 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC43XWC8V-06A tech bes lcd-00281 1 2 3 4 a b c c fujitsu display technologies corporation 14. indications this module has the following indications. (1) product name : lcd unit (2) model number : FLC43XWC8V-06A (3) product drawing number : na19027-c052 (4) manufacturing number : 3 x 0 0 0 0 1 (5) version number : 01a (example) -1st 2 digits ?01? means operational version. -3rd alphabet means functional version. (6) country of origin : made in taiwan (7) company name : fujitsu display technologies corp. (8) caution when changing cold-cathode tubes an d disposal method of them. (see fig. 14-1) serial number (to be reset every month on 1st.) manufacturing month (oct. = x, nov. =y, dec. =z) last digit of manufacturing year. fig.14-2 product label (example) lcd unit made in taiwan flc43xwc8v -06 a 2101234 na19027-c052 ** 01a fujitsu display technologies cor p
?y FLC43XWC8V-06A ?z 25 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC43XWC8V-06A tech bes lcd-00281 1 2 3 4 a b c c fujitsu display technologies corporation 15. packaging separately specified in packaging specifications. 15-1. packaging specifications (1) 5 lcd modules / 1 package. (2) weight: approximately 13kg / 1 package. (3) outline dimensions : 509mm(w) ?~ 250(d) ?~ 398mm(h) 15-2. packaging method fig.15-2 (a),(b),(c),(d),(e),(f), (g) show the packing method.
?y FLC43XWC8V-06A ?z 26 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC43XWC8V-06A tech bes lcd-00281 1 2 3 4 a b c c fujitsu display technologies corporation fig.15-2(a) packaging method
?y FLC43XWC8V-06A ?z 27 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC43XWC8V-06A tech bes lcd-00281 1 2 3 4 a b c c fujitsu display technologies corporation fig.15-2(b) packaging method
?y FLC43XWC8V-06A ?z 28 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC43XWC8V-06A tech bes lcd-00281 1 2 3 4 a b c c fujitsu display technologies corporation fig.15-2(c) packaging method
?y FLC43XWC8V-06A ?z 29 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC43XWC8V-06A tech bes lcd-00281 1 2 3 4 a b c c fujitsu display technologies corporation fig.15-2(d) packaging method
?y FLC43XWC8V-06A ?z 30 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC43XWC8V-06A tech bes lcd-00281 1 2 3 4 a b c c fujitsu display technologies corporation fig.15-2(e) packaging method
?y FLC43XWC8V-06A ?z 31 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC43XWC8V-06A tech bes lcd-00281 1 2 3 4 a b c c fujitsu display technologies corporation fig.15-2( ?? ) packaging method
?y FLC43XWC8V-06A ?z 32 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC43XWC8V-06A tech bes lcd-00281 1 2 3 4 a b c c fujitsu display technologies corporation figure.15-2( ?? ) packaging method
?y FLC43XWC8V-06A ?z 33 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC43XWC8V-06A tech bes lcd-00281 1 2 3 4 a b c c fujitsu display technologies corporation 16.warranty the warranty period is one year after manufacturi ng. products which fail during this period are repaired or replaced without charge, unless the failure is caused by user. 17.precautions adhere to the following precautions to properly use this lcd module. (1) fail safe design lcd module has an inherent chance of failu re. customers must protect against injury, damage or loss from such failures by incorp orating safety design measures into your facility and equipment such as redundancy, fire protection, and prevention of over-current levels and other abnormal operating conditions. (2) handling of lcd panel ?@ do not apply any strong mechanical shock to the lcd panel. since the lcd panel is made of glass, exce ssive shock may damage the panel or cause a malfunction. ?a do not press hard on the lcd panel surface. (max 2.0kg/cm 2 ) in the lcd panel, the gap between two glass plates is kept precisely and uniformly to maintain display?s characteristics and reliability. if the pressure is over 2.0kg/cm 2, the problem don't return to normal condition. (a) ununiformity of color (b) orientation of liquid cr ystal becomes disordered problem (a) returns to normal after a while. problem (b) returns to normal if power is shut off once then turned on again. however these operations should be avoided to insure reliability. ?b do not scratch the polarizer fi lm on the lcd panel surface. ?do not press or rub the display surface with a hard tool, pincet, etc. ?for handling, use cotton or conductive gloves so that the display surface is not stained. ?for if the display surface is stained by dust or dirt, clean it as follows with a soft cloth (deer skin, etc.) [dust] wipe off with a soft cloth. (do not rub.) [dirt ] wipe off lightly with a soft cloth af ter soaking in the clear water and squeezing hard out of water drops. only if the dirt is hardly wiped off, use isopropyl alcohol or ethanol. be careful not to splash the water or the solvent and water penetrated between the polarizer and the lcd panel. do not use solvents such as ketone (acetone, etc.) and aromatics (xylene, toluene, etc.) ?if saliva or water drops are left for long time, it may deform partial deformation or discolored. wipe off immediately in the same way as for dirt. ?do not allow oil to adhere to the module, since the cleaning of oil is difficult. ?c do not place or contact objects on the di splay surface for a long period of time. that?s because this may make some parts of the lcd module distorted and the display quality may decline.
?y FLC43XWC8V-06A ?z 34 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC43XWC8V-06A tech bes lcd-00281 1 2 3 4 a b c c fujitsu display technologies corporation (3) handling of lcd module ?@ do not pull the cold-cathode tube cable strongly. if the cable is pulled with the loaf of 2kg or more, the cable may be damaged or reliability may decrease. ?a assemble the module into user?s system in a dust free environment. if conductive foreign matter adheres to the module, failures may occur. ?b take anti-static measures for assembling the module. since the lcd module contains cmos-ics, the following considerations are necessary. ? for assembling the module, operator sh ould be grounded and wear cotton or conductive gloves. ? floor of work area and work table to assemble the lcd module should be covered with electrostatic shielding in order to discharge static electricity via an earth wire. ? if necessary, ground operation tools (sol dering iron, radio pliers, pincet, etc.). ? do not take the module out of the conducti ve bag until the time when the module is assembled. ? assemble the module under lo w humidity (50%rh or less). ?c do not pull the connecting cable on the re ar face of the lcd module strongly. ?d do not disassemble or remodel the lcd module. if this lcd module is disassembled or remodele d, it may have some trouble, or the display quality and reliability may not be assured. (4) precautions for operating the lcd module ?@ adhere to the specified power supply sequence. if not followed, the cmos-ic may cause a latc h-up, or the dc voltag e may be applied the liquid crystal, and a failure or serious dete rioration in display quality may occur. ?a do not operate the lcd module when condensation is present. if the lcd module is operated when condensa tion is on the terminals of the lcd panel, the terminals cause electrochemical reaction, and may reach disconnection. condensation easily occurs especially when the module is moved from a cold environment to a warm environment. ?b trouble that occurs when the lcd module is used at not recommended temperature. ? operation at high temperature(>60o c) :display colors shift to blue. ? storage at high temperature (>60oc) :the polarizer film deteriorates and contras decreases. ? operation at low temperature (<0oc) :the response speed decreases considerably. ? storage at low temperature (<-20oc) :t he liquid crystal may solidify and become damaged. ?c always input the control signals at the correct timing. if control signals (dclk, or enab) are not inpu t, or if the timing is out of the specified timing, dc voltage may be applied to the liq uid crystal and, as a result, cause image sticking or deterioration of contrast.
?y FLC43XWC8V-06A ?z 35 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC43XWC8V-06A tech bes lcd-00281 1 2 3 4 a b c c fujitsu display technologies corporation (5) precautions on designing module mounting ?@ do not press the display surface an d bottom face of the lcd module. display quality or reliability may be deteriorated if the installation of the lcd module is inappropriate and, as a result, excessive pressure is applied to the surface of lcd screen. brightness uniformity or the reliability of ccfl may decrease if the pressure is applied to the backlight module. ?a consider the module mounting design, so that twisting and bending do not occur to the lcd module. excessive twisting and bending may da mage display quality and reliability. ?b the power cable length between the lcd modu le and inverter should not be extended. otherwise the backlight may not lig ht or flickering may occur. ?c do not make the power cable of the ba cklight clung to a metal plate, etc. backlight frequency current for backlight dr iving may leak to the metal and desired brightness may not be assured. ?d when mounting lcd module with m4 screw(x4) sh ould be screw up under 5.75kgfcm torque. (6) storage method ?@ do not store the lcd module in an atmosphe re of organic solvent or corrosive gas. in an organic solvent atmosphere, the pola rizer film discolors and display quality deteriorates. in a corrosive gas environment, various problems may occur. ?a store the lcd module in a fujitsu package. at storing, fujitsu packages ca n be stacked up to 4 boxes. the lcd module is in an anti-static bag. keep the module in that status. ?b it is recommended that the storage environm ent should be humidity controlled, cool and dark. recommended storage environment ?place :dark (avoid direct sunlight) ?temperature : 10~35oc ?humidity : 50~60%rh note) if the module is left in an environment of 60 ?? or more for a long period of time, optical characteristics may deteriorate. (7) storage method ?@ if the lcd panel is damaged, do not inhale or allow the liquid crystal to enter the mouth if the liquid crystal contacts the body or clot hs, wash it off with soap immediately. follow precautions for regular electronic components. ?a solder flux on the printed circuit board is harmless to the quality and reliability of lcd module. fujitsu is practicing non-wash tech nology on module assembly process.
?y FLC43XWC8V-06A ?z 36 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC43XWC8V-06A tech bes lcd-00281 1 2 3 4 a b c c fujitsu display technologies corporation (8) caution in designing inverter fluorescent lamps driven by high voltage ar e included in this lcd module. please stand to the instructions below when designing inverter that lights the fluorescent lamps. otherwise it may lead to fatal fail ure, such as smoking or firing. ?@ apply protective circuit in prepara tion for lamp breaking, wire breaking and short circuit. the protective circuit should also detect half open circuit and wire breaking in narrow gap etc.. otherwise it may lead to fatal failure. ?a keep enough current capacity of inve rter output for leakage current, which leaks from lamps and wire to surrounding metal material. usually output current of about 1.5 times as same as the lamp current is necessary. but it sometimes varies due to characteristics of the inverter itself. so before determining design, please check characteristics of the inverter by connecting it to the lcd module. ?b keep enough temperature margin for each parts mounted on inverter. temperature of the parts becomes higher when they are mounted in the final products due to heating inside. the temperature of each parts must not increase over the guaranteed temperature.
?y FLC43XWC8V-06A ?z 37 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC43XWC8V-06A tech bes lcd-00281 1 2 3 4 a b c c fujitsu display technologies corporation 18. precautions for use this product is designed, developed and manufactured as contemplated for general use, including without limitation, general office use, personal use, household use, and ordinary industrial use, but is not designed, developed and manufactured as contemplated for use accompanying fatal risks or dangers that, unless extremely high safety is secured, could lead directly to death, personal injury, severe ph ysical damage or other loss (hereinafter ?high safety required use?), including without limitatio n, nuclear reaction control in nuclear facility, aircraft flight control, air traffic control, ma ss transport control, medical life support system, missile launch control in weap on system. if customer?s product possibly falls under the category of high safety required use, please consult with our sales representatives in charge before such use. in addition, fdtc shall not be liable against the customer and/or any third party for any claims or damages arising in conn ection with the high safety required use of the product without permission. 19. miscellaneous specifications of the tft-lcd panel and othe r components used in the lcd module are subject to change. both parties sha ll discuss together before change. if any doubt is raised in the content of the sp ecifications, both partie s shall discuss and make best effort for the agreement. 37

▲Up To Search▲

Price & Availability of FLC43XWC8V-06A

	To Download FLC43XWC8V-06A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .